|
Product Details:
Payment & Shipping Terms:
|
| Display Type: | Digital Only | Measuring Current Range: | 0 ~ 1000A AC/DC |
|---|---|---|---|
| Measuring Voltage Range: | 750V ( AC) / 1000V (DC) | Measuring Resistance Range: | 600/6K/60K/600K/6M/60M Ohms |
| Measuring Capacitance Range: | 10nF/100nF/1K/10K/100K/1M/1OM Hz | Measuring Inductance Range: | / |
| Operating Temperature: | 0~40 | Dimensions: | 240*85*47MM |
| Weight: | 380g | Product Name: | Digital Clamp Meter 1000v 1000a HT208A |
| DC Voltage: | 600mV/6V/60V/600V/1000V | AC Voltage: | 600mV/6V/60V/600V/750V |
| AC/DC Current (A): | 60A/600A/1000A | Resistance: | 600/6k /60k /600k /6M /60M OHMS |
| Capacitance: | 10nF/100nF/1K/10K/100K/1mF/10mF/100mF | Duty: | 1%-99% |
| TEMPERATURE: | 40C-1000C/ 0F-1832F | Selling Units: | Single Item |
| Single Package Size : | 30X20X10 Cm | Single Gross Weight: | 0.600 Kg |
| Package Type: | 50pcs Per Carton, Paper Carton | ||
| High Light: | 6000Counts Digital Power Clamp Meter,1000 Amp Auto Ranging Digital Clamp Meter,1000v Electronic Clamp Meter |
||
Habotest HT208D DCA ACA 1000V 1000A Professional Digital Clamp Meter with INRUSH NCV DCA ZERO
6000Counts
DC Votlage:600mV/6V/60V/600V/1000V
AC Voltage:600mV/6V/60V/600V/750V
AC Current:60A/600A/1000A
DC Current:60A/600A/1000A
Resistance:600/6k /60k /600k /6M /60M OHMS
Capacintance:10nF/100nF/1K/10K/100K/1mF/10mF/100mF
Frequency:10Hz/100Hz/1KHz/10kHz/100kHz/1MHz/10MHz
Duty:1%-99%
NCV
DCA Zero
VFD
Inrush
TRMS
REL
LowZ
Learning how to use a clamp meter is easy. However, it is important that you understand how a clamp meter works and how to best use it in any given environment.
Note that the following steps are only for measurements with a digital clamp meter.
Turn on the meter and remove the probe if it is connected
Using the dial, select AC or DC function
Open the jaws and drop into the conductor to be measured. Remember you should only measure properly insulated conductors and never measure around live wires for safety reasons
Close the jaws and adjust the conductor to make sure it is level and aligned with the center of the clamp
The current reading will be shown on the display
| Specification | HT208A | HT208D | Accuracy |
| DC Voltage | 600mV/6V/60V/600V/1000V | 600mV/6V/60V/600V/1000V | (0.5%+3) |
| AC Voltage | 600mV/6V/60V/600V/750V | 600mV/6V/60V/600V/750V | (0.8%+3) |
| AC Current | 60A/600A/1000A | 60A/600A/1000A | (2.5%+5) |
| DC Current | No | 60A/600A/1000A | (2.5%+3) |
| Resistance |
600/6k /60k /600k /6M /60M ohms |
600/6k /60k /600k /6M /60M ohms | (0.8%+3) |
| Capacitance | 10nF/100nF/1K/10K/100K/1mF/10mF/100mF | 10nF/100nF/1K/10K/100K/1mF/10mF/100mF | (3.0%+3) |
| Frequency | 10Hz/100Hz/1KHz/10kHz/100kHz/1MHz/10MHz | 10Hz/100Hz/1KHz/10kHz/100kHz/1MHz/10MHz | (0.5%+5) |
| Duty | 1%-99% | 1%-99% | (1.0%+2) |
| Temperature | 40C-1000C/ 0F-1832F | 40C-1000C/ 0F-1832F | (1.0%+2) |
| Counts | 6000 Counts | 6000 Counts | |
| Auto/Maual Range | Yes | Yes | |
| Continuity | Yes | Yes | |
| Diode | Yes | Yes | |
| Data hold | Yes | Yes | |
| NCV | Yes | Yes | |
| Back light | Yes | Yes | |
| Flashlight | Yes | Yes | |
| DCA ZERO | Yes | Yes | |
| Low battery indication | Yes | YES | |
| Auto Power off | Yes | YES | |
| True RMS | Yes | Yes | |
| INRUSH | Yes | Yes | |
| VFD | Yes | Yes | |
| MAX/MIN | Yes | Yes | |
| REL | Yes | Yes | |
| LowZ | Yes | Yes | |
| VA LCD | YES | YES | |
| Power | 3*AAA(1.5V)Batteries | 3*AAA(1.5V)Batteries | |
| Weight | Approx.380g | Approx.380g | |
| Size | 240mm*85mm*47mm | 240mm*85mm*47mm | |
| Jaw Size | dia 35mm*60mm | dia 35mm*60mm | |
| Safety Rating | EN61010-1,-2-030 EN61010-2-033,EN61326-1 CAT III 1000V,CAT IV 600V | EN61010-1,-2-030 EN61010-2-033,EN61326-1 CAT III 1000V,CAT IV 600V |
Product Photo:
*Inquiry and sonsulting support *12 months warranty
*Online presentation if necessary *Spare parts delivery
*Company & Factory Visit ( Site or Online) *New product exchange
*Free Samples (Shipping Cost Excluded) (Term & Conditions Apply)
Contact Person: Sales Manager
Tel: +8613798735962
| Factory Address:8th Bulding, Qinghu Industrial Zone, QingXi Town Dongguan,GuangDong,China | |
| Sales office:8th Bulding, Qinghu Industrial Zone, QingXi Town Dongguan,GuangDong,China | |
| +86--13798735962 | |
| sales@habotest.com.cn | |
